Finished Products--|Guangdong Hones Technology Co., Ltd.

Model: Finished Products

The above representations are for reference only. Final specifications are based on the actual product. Our R&D team specializes in developing customized solutions to meet your exact performance requirements.

Key Features:
- High-Temperature Resistance
- Hydrolysis Resistance
- High-Toughness Polymer Formulation
- Ideal for Metal Replacement Applications

Detailed Parameters: Typical Properties of PA66 Series

Model Specification Manual

Item	Test method	Unit	Conditions	Grade
Item	ASTM	Unit	Conditions	G35				RPA66	GF10	GF20	G25	GF30	GF35	T30
Physical properties
Density	D792	g/		1.31					1.45	1.48	1.5	1.53	1.55	1.4
Moisture Absorption	D570	%	23,24hr
Molding shrinkage	D955	%		0.7-1.4					0.5-1.0	0.4-0.8	0.4-0.8	0.3-0.6	0.3-0.6	0.8-1.2
Mechanical properties
Tensile strength	D638	Mpa		60					90	110	114	120	125	60
Elongation at break	D638	%
Bending strength	D790	Mpa		90					130	155	200	210	215	90
Bendingl modulus	D790	Mpa
Charpy impact strength	ISO179
Non gap				40					45	56	70	85	90	25
Gap				8					10	10	10	13	15	6
Thermal properties
Temperature of thermal deformation	D648		1.82Mpa	85					190	235	250	250	250	130
Coefficient of linear expansion	D696	1/
Combustion	UL-94		3.2mm厚	V-0					V-0	V-0	V-0	V-0	V-0	V-0
Electrical properties
Dielectric constant	D150		106Hz	2.7					3.0	3.2	3.2	3.2	3.2	3.4
Dielectric loss angle tangent	D150		106Hz	2.0*					1.6*	1.7*	1.7*	1.8*	1.8*	1.8*
Volume resistivity	D257	Ω.m
Dielectric strength	D149	MV/m	2mm厚	26					26	28	28	30	30	33
Technology characteristics				Flame retardant high fluidity					10%Glass fiber reinforced flame retardant	20%Glass fiber reinforced flame retardant	25%Glass fiber reinforced flame retardant	30%Glass fiber reinforced flame retardant	35%Glass fiber reinforced flame retardant	Mineral filled Good fluidity
Molding conditions	Dry temperature		Dry time（h)		Item	Barrel temperature				Mold temperature			Injection pressure（Mpa)
	Dry temperature		Dry time（h)		Item	Back end	Mid end	Front end	Nozzle	Mold temperature			Injection pressure（Mpa)
	130		4		Non enhanced	220-265	260-265	260-270	260-265	60-90			60-100
	130		4		Enhanced	230-240	265-270	265-270	265-270	60-90			90-120
Note: the above data is not the product of standard factory. For reference only.

Modified NYLON

Model: Finished Products